Red ONE OPERATION GUIDE Manuale Utente

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 9 IMAGE PROCESSING The digital images received from the MYSTERIUM or MYSTERIUM X sens

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 99 EVF MENU When checked, activates the rotary switch on the EVF and displays a Gray

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 100 100 METERS (PREVIOUSLY STATUS) When checked, displays media, exposure and audio

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 101 GREY SCALE When checked, displays an 11 step grey scale on right edge of all exte

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 102 102 AUTO This setting combines VARIABLE speed fan operation while not recording

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 103 NOTE: Prior to recording in Timelapse with extended exposure times (1/ 3 rd sec o

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 104 104 6. As the last step in the process the camera will display: 7. Installat

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 105 4. Restart the camera as instructed. RESTORE Restore permits camera configuratio

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 106 106 SYSTEM Allows all camera configuration parameters to be reset to the factor

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 107 If external media is not attached to camera when attempting to perform a write lo

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 108 108 MONTH Allows the operator to enter a new value for the monthbetween 1 and 1

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 10 10 This setting supports a guaranteed minimum of 18dB of input signal headroom a

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 109 SECONDS Allows the operator to enter new value for seconds. Range 0 – 59. SET CL

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 110 110 NOTE: S4/i communications requires appropriate hardware to be present in th

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 111 NOTE: When in Master / Slave the Slave camera will use the Master camera'

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 112 112 FLIP H Flips the live or playback image horizontally. FLIP V Flips the li

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 113 FEED Allows you to select between MENU and CLEAN output on HD-SDI. Default settin

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 114 114 APPENDIX A: UPGRADING CAMERA FIRMWARE RED ONE camera functionality may be

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 115 VERIFY CURRENT CAMERA FIRMWARE There are 2 ways to verify the current level of fi

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 116 116 3. After downloading the build, you will see the new compressed (zipped)

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 117 14. If there is valid upgrade firmware (build) version on the SD/REDMAG/CF card o

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 118 118 APPENDIX B: MANAGING DIGITAL MEDIA The RED ONE camera supports two types o

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 11 4. Twist joystick to select MENUS (DVI) or VIDEO (720p) in the PVW OUTPUT box abo

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 119 ure to do so may result in lost data or corrupted files. Refer to REMOVE MEDIA FR

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 120 120 2. When a CF card or REDMAG is inserted into the camera or a RED-DRIVE or

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 121 RE-FORMATTING MEDIA Re-formatting a previously used CF card, REDMAG, RED-DRIVE or

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 122 122 8. Once re-formatting is completed camera LCD displays “FORMAT DONE” and a

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 123 NOTE: The camera will respond to physical removal of the media without un-mountin

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 124 124 4. Camera LCD will display MEDIA X and the lower left corner of all extern

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 125 IMPORTANT: BEFORE PERFORMING THE NEXT STEP, DOUBLECHECK THAT THIS IS THE COR-RECT

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 126 126 APPENDIX C: SAVING LOOK / USER PROFILE The following information lists the

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 127 When saving LOOK, the following monitor path color correction information is reco

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 128 128 NOTE: If SD Card is not inserted under left front of camera, camera will di

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 12 12 • Enabling first / disabling last audio channel • Entering and exiting MAGN

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 129 APPENDIX D: INPUT / OUTPUT CONNECTORS RIGHT SIDE OF CAMERA A Headphone H USB-2

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 130 130 Pin: Signal Description Direction 1 Ground Camera ground - 2 TIMECODE_

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 131 VIEWFINDER (RED EVF) INTERFACE The RED EVF interface is a custom digital video an

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 132 132 Reference signal level for Line inputs is 0dBu / 0.775 volts RMS / -20dBFS

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 133 LINE AUDIO OUTPUT A 5-pin mini-XLR connector supports two channels of balanced an

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 134 134 Volume Left: Trims volume for Left output. E.g. Volume –6dB + Volume Left +

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 135 GENLOCK INPUT A single DIN 1.0/2.3 coaxial connector accepts a Tri-Level Sync si

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 136 136 In record, the Program output provides two independent outputs of 1280 x 72

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 137 Selection between these two modes is made in SYSTEM > MONITOR > PREVIEW. Th

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 138 138 DC POWER INPUT The POWER input connector (A) accepts a DC voltage between +

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 13 MASTER / SLAVE CAMERA CONFIGURATION Master / Slave configuration is used to connec

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 139 AUXILIARY POWER OUTPUTS The camera provides two auxiliary power output connectors

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 140 140 APPENDIX E: MASTER / SLAVE CAMERA CONFIGURATION When cameras are connected

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 141 CONNECTING After mounting the master and slave cameras in the final configuration

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 142 142 Use an external Ambient Clockit! or comparable device to JAM SYNC the camer

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 143 NOTE: Displays TINT if camera is not in master / slave configuration; displays T

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 144 144 CLIP NAMING CONVENTIONS CAMERA POSITION / SLATE / CAMERA ID Under SYSTEM ME

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 145 APPENDIX F: EXPOSURE TIPS – USING FALSE COLOR AND ISO Build 30 firmware introduc

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 146 146 ISO 800 - false color: Exposure Select False Color – Exposure: note the √

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 147 Select False Color – Video: note the √ V icon in the GUI when active. This mode a

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 148 148 ISO 800 - False Color: Exposure Select False Color – Exposure: note the √

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 14 14 Where: A = camera A, 001 = reel 001, C002 = clip 002, and 0502 = May 02 And A

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 149 Select False Color – Video: note the √ V icon in the GUI when active. This mode a

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 150 150 ISO 800 - False Color: Exposure Select False Color – Exposure: note the √

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 151 Select False Color – Video: note the √ V icon in the GUI when active. This mode a

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 152 152 ISO 100 - no exposure adjustment In these extreme examples it is clear th

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 153 APPENDIX G: POST PRODUCTION RED workflow is quite easy to understand, especially

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 154 154 RED QUICKTIMECODEC (Use V3.9.0 or higher for Build 30 footage) NOTE: V3.9.

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 155 REDCINE-X® REDCINE-X is available on Intel based Mac OSX and Windows XP platforms

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 156 156 APPENDIX H: POSSIBLE ERRORS, ISSUES AND SOLUTIONS For errors or issues bey

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 157 Error Message: Black Shading - Calibration Failed – Exit Magnify Mode and Try Aga

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 158 158 Error Message: VALID SETTINGS (Invalid Settings) Establish the maximum PROJ

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 15 POWER CONSUMPTION A Mysterium sensor based RED ONE camera draws approximately 75 W

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 159 This may be caused by one of the following: • The camera settings were changed

©2010 RED.COM, INC.SHEET 1 OF 1TITLE:REVAaccessoryOptionSmysterium & mysterium-xRED one TmTOP HANDLETOP HANDLEEXTENSIONSIDE HANDLERED HANDLE MOUNT

TITLE:31.6.16REVABUILD:©2010-2011 RED.COM, INC.mysterium® & mysterium x®RED one®NONE AVAIL.VIDEOVIDEOLOOKZEBRA 1HI IRE108COLOR TEMPMenuSENSORSHUTT

TITLE:31.6.16REVABUILD:©2010-2011 RED.COM, INC.mysterium® & mysterium x®RED one®< Disabled >SYSTEM MEDIAPRE-RECORDSOUNDOUTPUT LEVEL0.0 dBMED

TITLE:31.6.16REVABUILD:©2010-2011 RED.COM, INC.mysterium® & mysterium x®RED one®720pCLIPSYSTEM PLAYBACK720p1080pCAMERACLIPMEDIAMenuSYSTEMPROJECTMe

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 16 16 CAMERA CONTROLS, CONNECTORS AND DISPLAYS This section describes the physical

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 17 An SD Memory Card slot (D) is located below User Key 2, which supports most SD Car

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 18 18 A User Menus Select F UNDO / Alternate Action B Sensor Menu G System Menu C

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 1 TABLE OF CONTENTS DISCLAIMER ... 3 Copyright No

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 19 Below the LCD status display are the Joystick (E), Exit (D), Undo / Alternate Acti

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 20 20 POWER ON / OFF SWITCH Power on/off switch (A) is located on the lower rear of

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 21 CAMERA CONNECTORS RIGHT SIDE OF CAMERA This section describes the physical connect

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 22 22 NOTE: Cameras shipped prior to Sept 15th 2008, may have an earlier revision o

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 23 CAMERA DISPLAYS The LCD status display mounted at the rear of the RED ONE camera p

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 24 24 RED EVF Figure 9 – RED EVF The RED EVF comprises the following components: A

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 25 BOMB EVF Figure 9 – BOMB EVF The BOMB EVF comprises the following components: A.

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 26 26 C. Two (2) programmable USER KEY 3 and 4 buttons. When looking from the fron

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 27 NOTE: The internal test signals cannot be recorded; they are provided to align ext

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 28 28 • Master / Slave Indicator: Indicates camera as Master (M) or Slave (S) whe

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 2 2 Upgrade Procedure ... 115 APPENDIX B: MANAGING DIGITAL MEDIA ..

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 29 BASIC OPERATION This section describes powering up/down and basic controls of the

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 30 30 OPERATING CAMERA USING RED CHARGER 1. Plug the RED CHARGER into an AC power

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 31 5. Leave the battery to charge for the appropriate time as shown in the table (as

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 32 32 CONNECTING MEDIA Insert the CF card with the manufacturer’s label facing outw

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 33 PROJECT SETUP 1. Push the SYSTEM menu button. 2. Using the joystick, highlight P

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 34 34 TIME BASE Selecting TIME BASE will highlight the upper right hand menu item a

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 35 Digital media should be treated with equal care as exposed film or a videotape mas

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 36 36 BACK FOCUS ADJUSTMENT 1. Level the camera on a stable surface or tripod. 2.

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 37 6. Allow for an even amount of play on both sides of the lens focus marker. There

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 38 38 SENSOR MENU CONTROLS This section describes how to set sensor specific menu p

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 3 DISCLAIMER RED® has made every effort to provide clear and accurate information in

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 39 COLOR TEMP The Color Temperature sub-menu adjusts the purity of white reproduction

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 40 40 TRIM SINGLE CAMERA CONFIGURATION Color Temperature calculations assume a pur

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 41 S TINT (SLAVE CAMERA TINT TRIM) Only used when in Master / Slave configuration, S

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 42 42 SHUTTER MENU Adjusts exposure time of each frame captured by the MYSTERIUM s

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 43 MODE Enables one of three following shutter modes: Normal, Syncro, or Relative. De

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 44 44 When operating at 23.98 or 24.00fps, these equal common shutter angles of:

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 45 To Convert Shutter Speed to Angle Equivalent: Equivalent Degrees = (Shutter Spe

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 46 46 VARISPEED Before recording, enable this function by placing a checkmark in th

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 47 Minimum frame rate is 1 fps; maximum frame rate is a function of REDCODE setting

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 48 48 REDCODE 42 REDFLASH 8GB REDFLASH 16GB RED-DRIVE RED-RAM REDMAG 2K 2:1 --

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 4 4 AUSTRALIA AND NEW ZEALAND STATEMENT Attention: This is a Class A product. In a

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 49 times, perform a Black Shading calibration again when you revert to shorter exposu

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 50 50 STEP PRINT Specifies the number of times each single frame captured in Time-l

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 51 AUDIO / VIDEO MENU CONTROLS This section describes monitor path parameters such a

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 52 52 LOOK The LOOK menu permits Video, Gain and Tone values to be exported or impo

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 53 EXPORT The current settings for Color and Gain parameters are stored to the SD Car

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 54 54 CONTRAST Adjusts the overall contrast of the image. Range is -1.00 (flat) to

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 55 GREEN GAIN Adjusts the gain of the GREEN channel only. Range is 0.0 (no Green) to

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 56 56 TOE Y Adjust the location of a control point along the Y-axis on the tonal re

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 57 The EXPOSURE meter’s color bands provide the following information: PURPLE Minimum

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 58 58 FOCUS (PREVIOUSLY EDGE HIGHLIGHT) FOCUS displays a Blue color overlay that ou

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 5 BEFORE YOU START Congratulations on your purchase of a RED ONE camera. This operati

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 59 At all other values, the monochrome image displayed represents the luminance value

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 60 60 SPOT METER A red rectangular box will appear centered on the center cursor of

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 61 RAW CLIP METER The RAW Clip meter looks a traffic light style meter and indicates

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 62 62 UNDER AND OVER EXPOSURE EXAMPLE NOTE: It is recommended to use the RED Camboo

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 63 In the above example the camera is significantly under exposed. The histogram is

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 64 64 WAVEFORM A color-coded waveform illustrates the exposure values using the ful

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 65 FOCUS ASSIST A full screen width red rectangular box will appear centered on the c

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 66 66 When the joystick is pressed, the sample box disappears and the average focus

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 67 To adjust HI IRE: Select HI IRE and twist joystick to change the UPPER IRE: box to

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 68 68 To adjust LO IRE: Select LO IRE and twist joystick to change the LOWER IRE: b

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 6 6 • Avoid imaging of laser beams as they may cause damage to the sensor. • DO N

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 69 INTENSITY (PREVIOUSLY DARK DETAIL) Intensity allows the intensity of the BOMB EVF

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 70 70 4. Move joystick left or right to select and exit. LINE LEVEL INPUTS Line L

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 71 VOLUME (MASTER) Adjusts headphone master volume equally for Left and Right outputs

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 72 72 SYSTEM MENU CONTROLS This section describes the various controls available to

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 73 1. Select OUTPUT LEVEL and push in or down on Joystick. 2. VOLUME box will highl

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 74 74 magazine. At the end of the defined pre-record duration, the first chunk of v

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 75 NOTE: When using Pre-Record, the Edge Code written to the digital magazine can bec

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 76 76 3. Move Joystick to the left and select FORMAT. If the magazine is not empty

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 77 STATUS Status menu allows the operator to view the current project settings and sa

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 78 78 When the project settings are saved successfully to the SD card, the followin

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 7 CAUTION: The power cord plug for the AC Power Adapter is used as the power disconne

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 79 3. Move Joystick up to select and exit. NOTE: For Master / Slave Configuration in

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 80 80 REDCODE 36 REDFLASH 8GB REDFLASH 16GB RED-DRIVE RED-RAM REDMAG 2K 2:1 6

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 81 1. To set time base, select TIME BASE and press in or down on joystick. 2. Twis

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 82 82 TIMECODE Select to change displayed timecode track, force Jam sync or reset c

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 83 4. Move joystick left or right to select and exit. GENERATE Cross Gen activates

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 84 84 1. Push in or down on joystick to place checkmark in TIMEZONE checkbox. 2.

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 85 FRAME GUIDE This sub-menu provides a selection of frame guides and safe action and

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 86 86 1. To select frame guide enable color, push in or down on joystick to place

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 87 CUSTOM (PREVIOUSLY PROGRAM) Custom allows the use to program the specific PROTECT

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 88 88 TITLE: Enables / disables inner guides. Style may be specified as a corner ma

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 8 8 THEORY OF OPERATION The RED ONE Digital Cinema camera provides high performance

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 89 SET: Push SET to save these parameters to non-volatile memory, exits menu and retu

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 90 90 To enable/disable a test signal check the box and select the desired test sig

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 91 PVW REFRESH (FORMERLY HD-SDI) Sets the1280 x 720p HD-SDI and HDMI monitor signal u

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 92 92 SETUP This menu permits a variety of system maintenance tasks to be accompli

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 93 When user profile is exported successfully, the following message will be displaye

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 94 94 USER-1: User Key 1 is the upper user key (button) on the camera side. De

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 95 INPUT A/B Permits the function of GPI A and B to be defined as: RECORD (Default):

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 96 96 GPIO IN: ACTIVE_LO is the default, which means the GPIO IN command will be ac

Build 31 v31.6.16 NOVEMBER 28, 2011 © 2007-2011 RED.COM INC. 97 LOOK Look permits the look used by the camera on playback to be specified. Default

Build 31 v31.6.16 © 2007-2011 RED.COM INC. NOVEMBER 28, 2011 98 98 When unchecked, the upper edge of all external motors will be blank. LENS DA